856532 1950 mhz saw bandpass filter data sheet: rev d 04-01-15 - 1 of 6 - disclaimer: subject to change without notice ? 2015 triquint semiconductor, inc. www.triquint.com ? / ? www.qorvo.com rfmd + triquint = qorvo applications ? lte band 1 ul filter for infrastructure ? 3g, 4g multi-standard ? wireless repeaters ? general purpose wireless ? base stations smp-12, 3.00 x 3.00 x 1.22 mm functional block diagram 4 2 3 1 6 5 input output gnd gnd gnd gnd product features ? 60 mhz bandwidth ? low loss ? high attenuation ? single-ended operation ? no impedance matching required for operation at 50 ? ? small size: 3.00 x 3.00 x 1.22 mm ? ceramic surface mount package (smp) ? hermetically sealed ? rohs compliant, pb-free ordering information part no. description 856532 packaged part 856532-evb evaluation board standard t/r size = 5000 units/reel pin configuration ? single ended pin no. label 2 input 5 output 1,3, 4 6 ground general description 856532 is a band 1 uplink filter for general purpose wireless applications. this filter was specifically designed in a 3x3 ? mm hermetic package f or base station applications and is part of our wide portfolio of r f filters in the same package. 856532 has l ow insertion loss, coupled with high attenuation and good power handling, making this filter a natural choice for our customers uplink rf filteri ng needs and other general purpose applications. 856532 require no matching components , making filter implementation easy. p b
856532 1950 mhz saw bandpass filter data sheet: rev d 04-01-15 - 2 of 6 - disclaimer: subject to change without notice ? 2015 triquint semiconductor, inc. www.triquint.com ? / ? www.qorvo.com rfmd + triquint = qorvo absolute maximum ratings parameter rating notes: 1. operation of this device outside the parameter r anges given may cause permanent damage. 2. specifications are not guaranteed over all opera ting conditions. 3. input power is targeted for an applied cw modula ted rf signal at 105 ? c for 10 years. storage temperature ? (1) ?40 to +105 ? c operating temperature ? (2) ?30 to +85 ? c rf input power (3) +10 dbm electrical specifications (1) test conditions unless otherwise noted: (2) temp= ?30 ? c to +85 ? c parameter (3) conditions min typ ? (4) max units center frequency - 1950 - mhz maximum insertion loss 1920 ? ? ? 1980 ? mhz - 2.5 3.0 db amplitude ripple ?? (5) - 0.7 1.5 db p-p absolute attenuation ? (6) 10 ? ? ? 1000 ? mhz 1000 ?? ? ? 1880 ? mhz 2110 ? ? ? 2170 ? mhz 2170 ? ? ? 3800 ? mhz 3800 ? ? ? 5000 ? mhz 25 20 40 25 18 31.7 31.8 43.6 29.1 22.5 - db input/output return loss 1920 ? ? ? 1980 ? mhz 8 9.6 - db test conditions unless otherwise noted: (2) temp= ?40 ? c to +85 ? c parameter (3) conditions min typ ? (4) max units maximum insertion loss 1920 ? ? ? 1980 ? mhz 2.5 3.2 db amplitude ripple ?? ( 5 ) 1920 ? ? ? 1980 ? mhz 0.7 1.5 db p-p absolute attenuation ? (6) 10 ? ? ? 1000 ? mhz 1000 ?? ? ? 1880 ? mhz 2110 ? ? ? 2170 ? mhz 2170 ? ? ? 3800 ? mhz 3800 ? ? ? 5000 ? mhz 3800 ? ? ? 5000 ? mhz at +105 ? c ? (8) 25 20 40 25 18 17 31.7 31.8 43.6 29.1 22.5 22.5 - db input/output return loss 1920 ? ? ? 1980 ? mhz 1920 ? ? ? 1980 ? mhz at +105 ? c ? (8) 8 7 9.6 8.6 - db source impedance ? ( 7 ) single-ended - 50 - load impedance ? ( 7 ) single-ended - 50 - notes: 1. all specifications are based on the triquint sch ematic for the main reference design shown on page 3. 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature. 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances. 4. typical values are based on average measurements at room temperature. 5. evaluated as peak-to-adjacent valley ripple. 6. relative to zero db. 7. this is the optimum impedance in order to achiev e the performance shown. 8. extended temperature operation: the filter can be o perated up to +105 ? c with de - rated specification as noted.
856532 1950 mhz saw bandpass filter data sheet: rev d 04-01-15 - 3 of 6 - disclaimer: subject to change without notice ? 2015 triquint semiconductor, inc. www.triquint.com ? / ? www.qorvo.com rfmd + triquint = qorvo evaluation board ch jjjym 960700 1,3,4,6 2 5 50 50 ? ? notes: 1. no impedance matching required. 2. top, middle & bottom layers: 1 ? oz. copper. substrates: fr4 dielectric 031? thick. finish plating: nickel: 3-8 ? m thick, gold: 0.03 ? - 0.2 ? m thick. hole plating: copper min .0008 ? m thick. bill of material reference des. value description manuf. part number u1 - 1950 mhz saw filter triquint 856532 sma - sma connector radiall 9602-1111-018 pcb - 3-layer triquint 960700 pcb mounting pattern .96 3.20 sq 1.27 .38 .81 1.70 notes: 1. all dimensions are in millimeters. angles are i n degrees. 2. this drawing specifies the mounting pattern used on the triquint evaluation board for this product. some modificati on may be necessary to suit end user assembly materials and processes.
856532 1950 mhz saw bandpass filter data sheet: rev d 04-01-15 - 4 of 6 - disclaimer: subject to change without notice ? 2015 triquint semiconductor, inc. www.triquint.com ? / ? www.qorvo.com rfmd + triquint = qorvo performance plots ? evaluation board test conditions unless otherwise noted: temp= +25 ? c
856532 1950 mhz saw bandpass filter data sheet: rev d 04-01-15 - 5 of 6 - disclaimer: subject to change without notice ? 2015 triquint semiconductor, inc. www.triquint.com ? / ? www.qorvo.com rfmd + triquint = qorvo package information, marking and dimensions 0.69 1.22 nom. 1.32 max. 0.75 0.60 1.50 0.75 3.00 3.00 ch code marking date code jjjym logo id dot triquint package style: smp-12a body: al 2 o 3 ceramic. lid: kovar , ni plated. terminations: au plating 0.5 - 1.0 ? m, over a 2-6 ? m ni plating. the date code consists of: day of the current year (julian, 3 digits), y = last digit of the year, and m = manu facturing site code. notes: 1. all dimensions shown are typical in millimeters. 2. all tolerances are 0.15 ? mm except overall length and width 0.10 ? mm. 3. an asterisk (*) in front of the marking code ind icates prototype. tape and reel information standard t/r size = 5000 units/reel . all dimensions are in millimeters logo triquint pad 1 id dot direction of travel 2.0 ?13.0 ?20.2 12.8 ?330 2.7 ?102 3.25 section a-a 1.75 ?1.5 4.0 a 12.0 5.5 ?1.5 4.0 2.0 3.25 1.4 0.21 a
856532 1950 mhz saw bandpass filter data sheet: rev d 04-01-15 - 6 of 6 - disclaimer: subject to change without notice ? 2015 triquint semiconductor, inc. www.triquint.com ? / ? www.qorvo.com rfmd + triquint = qorvo product compliance information esd sensitivity ratings caution! esd-sensitive device esd rating: class 1b ? test:electrostatic discharge sensitivity testing, human body model (hbm) - com ponent level standard: esda/jedec js-001-2012 ? esd rating: class b test: machine model (mm) standard: jedec standard jesd22-a115 solderability compatible with both lead- free (260c maximum reflow temperature) and tin/lead (245c maximum reflow temperature) soldering processes. refer to soldering profile for recommended guidelines . rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazar dous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating not applicable. hermetic package. contact information for the latest specifications, additional product i nformation, worldwide sales and distribution locati ons: web: www.triquint.com tel: 877-800-8584 email: customer.support@qorvo.com for information about the merger of rfmd and triqui nt as qorvo: web: www.qorvo.com for technical questions and application information : email: flapplication.engineering@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding the informat ion contained herein. triquint assumes no responsibility or liability wha tsoever for any of the information contained herein. triquint assumes no responsibility or liab ility whatsoever for the use of the information con tained herein. the information contained herein is provided "as is, wh ere is" and with all faults, and the entire risk as sociated with such information is entirely with the user. all information contained herein is subject to change w ithout notice. customers should obtain and verify the latest relev ant information before placing orders for triquint products. the information contained herein or any use of such inf ormation does not gr ant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such inform ation itself or anything described by such information. triquint products are not warranted or authorized f or use as critical components in medical, life-savi ng, or life- sustaining applications, or other applications wher e a failure would reasonably be expected to cause s evere personal injury or death.
|
